Høyttalerkabel kobber 4 mm² hvit - Metervare - Premium - Inakustik
Høykvalitets høyttalerkabel med 2x4 mm² tverrsnitt. Hvit.
Women's clothing size
| Size | XS | S | M | L |
|---|---|---|---|---|
| Euro | 32/34 | 36 | 38 | 40 |
| USA | 0/2 | 4 | 6 | 8 |
| Bust(in) | 31-32 | 33 | 34 | 36 |
| Bust(cm) | 80.5-82.5 | 84.5 | 87 | 92 |
| Waist(in) | 24-25 | 26 | 27 | 29 |
| Waist(cm) | 62.5-64.5 | 66.5 | 69 | 74 |
| Hips(in) | 34-35 | 36 | 37 | 39 |
| Hips(cm) | 87.5-89.5 | 91.5 | 94 | 99 |
With your arms relaxed at your sides, measure around the fullest part of your chest.
Measure around the narrowest part of your natural waist, generally around the belly button. To ensure a comfortable fit, keep one finger between the measuring tape and your body.
Dynavox 4pk bananplugger
Høyttalerkabel kobber 4 mm² hvit - Metervare - Premium - Inakustik
- Kobberkabel med svært høy renhet
- Solid tverrsnitt på 2x4 mm2
- Produsert i Tyskland
- Fleksibel hvit isolasjon
- Markering av pluss og minus
- Finely-stranded: 0.15 mm wire design
Pris per meter. Full rull er 100 meter.
Fra produsent:
Under normal conditions, copper is the next-best electrical conductor after silver. Compared to cheap CCA (Copper Coated Aluminum) in particular, copper has a significantly better conductivity and is also mechanically more resilient. The wires of the Premium LS-CU speaker cable are made of particularly high-purity copper. A conductor cross-section of up to 4 mm² provides the basis for a powerful and dynamic sound.
Stranded wire is a tried-and-tested conductor design. In the Premium LS-CU speaker cable, the strands consist of 30 x 0.25 mm (1.5 mm²), 50 x 0.25 (2.5 mm²), 84 x 0.30 mm (4.0 mm²) wires "braided" together. The advantage of this design lies in the mechanical flexibility, which increases with smaller diameters of the individual wires. For cost reasons, many loudspeaker cables use the same stranded wire with the same stranding direction for both the positive and negative conductors. However, these cables are not easy to lay and tend to get tangled due to the torsional forces acting on the strands in the same direction. This can be remedied by using stranded wires with different stranding directions for the positive and negative conductors. The opposing torsional forces cancel each other out and the cable can be laid more easily and smoothly.
